Simple-Q water purification system uses municipal tap water as the feed water to prepare tertiary water and deionized water, with a flow rate of 20/30/45 liters per hour. The quality of the produced water meets or exceeds the water quality standards for primary and tertiary water as stipulated in China's Laboratory Water Standards and Test Methods (GB6682-2008) and ASTM, CLSI.
Innovations
1. Traditional distilled water apparatus upgraded alternative products;
2. Consumables modular design, only a few dozen seconds to complete the replacement of the three-stage pretreatment and purification column.
System Characterization:
Clear and concise status display
Full-automatic microcomputer control system, LED liquid crystal screen real-time display of animated working status;
Operation status is intuitive and easy to read, real-time display of flushing, water production, water full, water shortage and maintenance status.
Comprehensive water quality monitoring
Water quality online monitoring, real-time monitoring of deionized water quality;
Portable detector, dry battery design, can measure the TDS value and water temperature of tap water, RO water and deionized water at any time.
System alarm and maintenance
With sound and light alarm functions such as power-on self-test, power failure reset, over-limit work, water shortage, low pressure and high pressure protection;
With power-on, water shortage reset and cumulative water production of 2 hours of three RO membrane anti-scaling timed 30-second flushing program to extend the life of RO membrane;
Water leakage protection device, when the system leakage is detected automatically close the water inlet valve, and send an alarm signal (optional).
Purification column
Adopting advanced full-sag flow purification method, effectively preventing resin stratification;
Adopting the resin of American Dow ion exchange capacity (original imported resin) to reduce the cost of use.
Water tank
After optional pressure water tank or liquid level water tank, it can realize fully automatic work in line with laboratory instruments, and the pressure can be adjusted.
| Model |
Simple-Q20/30/45 |
| Application area |
Preparation of microbial culture medium, Buffer preparation, Hydroponics, Preparation of chemical and biochemical reagents, FAAS, Spectroscopic measurement, Water supply for laboratory equipment |
| Feed water requirements * |
Tap water, temperature:5-45ºC,pressure:1.0-4.0Kgf/cm² |
| System process ** |
PF+AC+RO+DI |
| Deionized water quality |
| Resistivity (25ºC) |
18.25MΩ·cm@25ºC |
| Heavy metal ion |
<0.1 ppb |
| TOC *** |
<30 ppb |
| RO water quality |
| Conductivity |
≤Feed water Conductivity × 2% |
| Organic rejection rate |
>99%, when MW>200 Dalton |
| Particles and bacteria rejection rate |
>99% |
| Output (25ºC) |
RO/Q20: 20L/hour; RO/Q30: 30 L/hour; RO/Q45: 45L/hour |
| Flow rate |
Up to 2 liters/minute (with pressure tank) |
| Product specification |
| Pure water outlet |
2: reverse osmosis water, deionized water |
| Dimension and weight |
H 530×W 325×D 560mm / Weight: about 20Kg |
| Power |
AC100-240V, 50/60Hz, 72W |
| Standard configuration |
Main body (Including 1 set of cartridge) +12 liters pressure tank |
* Inlet water quality will affect the quality of pure water and the life of the filter column
** PF: pre-filtration, AC: activated carbon, RO: reverse osmosis, DI: ion exchange
*** Conductivity of influent water = 400μs, measured at 25°C, 50psi, and 15% recovery ratio.
Q1. What products do you offer?
We offer a wide range of laboratory instruments including centrifuge, vacuum centrifugal concentrators, veterinary equipment, laboratory Water Purifier, nitrogen / hydrogen / air generator, vacuum freeze dryers, homogenizers, freezing microtome, high-throughput tissue grinders, ultrasonic cleaning machines, magnetic stirrer and more. In addition, we also provide single-use bioprocessing products. Welcome to inquire us.
Q2. What kind of services do you offer?
We offer sales, installation, maintenance, and repair services for all of our laboratory instruments.
Q3. Do you have a factory?
Yes, we have a certified standard factory with professional manufacturing capabilities, welcome to visit our factory.
Q4. Can I use my own logo or design on the goods?
Yes, we provide OEM/ODM service, your logo and design can be made on the products.
Q5. Do you ship internationally?
Yes, we ship internationally to customers all over the world.
Q6. Do you provide warranty for your products?
Yes, we provide a warranty for all of our products. Please refer to the specific product page for more information on the warranty period.
Q7. How can I place an order?
To place an order, please contact our sales team via email or phone. They will assist you with the ordering process.
Q8. Can I request a custom configuration for a product?
Yes, we can accommodate custom configurations for certain products. Please contact our sales team to discuss your requirements.
Audited Supplier 
Simple-Q water purification system uses municipal tap water as the feed water to prepare tertiary water and deionized water, with a flow rate of 20/30/45 liters per hour. The quality of the produced water meets or exceeds the water quality standards for primary and tertiary water as stipulated in China's Laboratory Water Standards and Test Methods (GB6682-2008) and ASTM, CLSI.
){kind=link}