The LabSE system uses tap water as the inlet to prepare tertiary water and deionized water/ultrapure water, with four water production flow rates of 45/63/95/125 liters per hour. The water quality of the produced water meets or exceeds the water quality standards specified in the Chinese Laboratory Water Standards and Test Methods (GB6682-2008) and ASTM, CLSI.
Advantages of LabSE series systems:
1. ABS engineering plastic shell, prevents rust, beautiful
2. Independent water intake device, capable of independently taking water from a distance of 2 meters (extendable) away from the main engine
3. The pre-treatment and purification columns are designed as an integrated unit, which can be replaced by professionals without the need for specialized personnel
System characteristics
out-of-the-box
Easy to install
The installation is quite simple, and all the filtering consumables have been installed into the host. During installation, simply connect tap water and wastewater, turn on the power, and you can use it immediately. We also provide on-site installation and training services.
Space saving
The compact and small design occupies only 0.18m2, allowing you to freely place it anywhere in the laboratory without taking up a lot of space.
Easy to use
Convenient access to water: The timed water intake function can be set from 1 to 99 minutes to avoid waiting for water intake; The fixed quality water intake function can be set arbitrarily from 0.1-18.25M Ω. cm.
Information acquisition:The innovative touch operable glass panel can display all key information, including various system parameters, operational functions, and water quality status.
Water quality alarm: Water quality exceeding limit alarm/consumable life alarm/water shortage/full water alarm. When the alarm occurs, the alarm interface will automatically pop up, displaying the current alarm information.
User Management: There are factory and user level two passwords, and the system settings are password protected to prevent unauthorized changes.
Easy to maintain: The integrated design of consumables means that when you need to replace them, the system will automatically remind you. Its simple design allows you to replace them yourself within a few minutes.
The service life of PP pretreatment column, RO reverse osmosis column, UP purification column, and UV lamp can be determined by themselves (parameters can be set), and the consumables' usage time can be queried; To prevent scaling of the RO membrane, there are two types of RO membrane anti scaling flushing functions, manual and automatic.
Water quality assurance
Water quality monitoring: The system comes with high-precision conductivity and resistivity monitoring devices, which are used to detect tertiary water and deionized water/ultrapure water, respectively. The conductivity electrode constant reaches 1.0cm-1 and the resistance electrode constant reaches 0.01cm-1. It has a temperature automatic compensation function and a temperature sensitivity of 0.1 ºC, ensuring the accuracy of water quality monitoring.
Ultra low heat source: The 5000 Dalton ultrafiltration module imported from Germany can reduce the heat source (endotoxin) of the produced water to below<0.001Eu/ml, which is ideal for molecular biology, cell culture, cell immunohistochemistry and other experiments (limited to UF/FV models).
Ultra low TOC: The dual wavelength ultraviolet lamp imported from the United States can reduce the total organic carbon (TOC) of the produced water to below 3 ppb to meet your experimental needs sensitive to organic matter, such as HPLC GC,Ion chromatography, TOC analysis, etc. (limited to UV/FV models).
Terminal filtering: 0.22 μ m imported PES membrane terminal filter provides sterile, particle free ultrapure water that meets your needs.
The independent water intake device can independently draw water from a distance of 2 meters (extendable) away from the host
Can be operated through touch sensitive switches or external foot switcheswater intaking
If manual water intake is not convenient, the foot switch (optional) can be connected to the base of the independent water intake device to achieve foot operated water intake
Pure water delivery system (optional) with a water tank capacity of 50-1000 liters
Multiple specifications are available, with an air filter installed on the top and a pure water distribution pump at the outlet of the water tank for flow distribution. 2-15 liters/minute with multiple specifications to choose from
Accessories and consumables for pure water system
Source water pretreatment component
For areas with poor water quality, it is recommended to install additional source water pretreatment components in front of the host to pre treat the water and effectively protect the host
-If the source water is urban tap water, it is recommended to choose a 10/20 inch filter
-If the source water is untreated groundwater, it is particularly recommended to choose a combination of a pre installed stainless steel flushing filter and a 10/20 inch filter for use
| Item number |
Product name |
Description |
| PF-10S/PF-20S |
10/20 inch single-stage filter |
Optional PP cotton, soft water, activated carbon filter cartridge |
| PF-10D/PF-20D |
10/20 inch dual stage filter |
Optional PP cotton, soft water, activated carbon filter cartridge |
| PF-10T/PF-20T |
10/20 inch three-stage filter |
Optional PP cotton, soft water, activated carbon filter cartridge |
| PC-10PP/PC-20PP |
10/20 inch PP filter cartridge |
Remove rust, sediment, suspended particles, etc. from water |
| PC-10AC/PC-20AC |
10/20 inch granular activated carbon filter cartridge |
Adsorption of microorganisms, organic matter, residual chlorine, etc. in water |
| PC-10RS/PC-20RS |
10/20 inch soft water resin filter cartridge |
Reduce the hardness index of water and remove calcium and magnesium ions |
| QZ-filter |
Pre installed stainless steel flushing filter |
Removing solid particles such as sediment from water can be used for pretreatment of groundwater and well water |
Fully automatic regeneration soft water system
Application:
Remove calcium (Ca2+) and magnesium (Mg2) ions from water, reduce the hardness of the influent, prevent scaling of the RO membrane, and extend its lifespan, effectively protecting components such as the pre purification column, reverse osmosis membrane, and EDI module.
Characteristic:
By using sodium type cation resin to replace calcium and magnesium ions in the source water, the purpose of softening water can be achieved;
Intelligent control valve, realizing fully automatic soft water and fully automatic reverse flow resin regeneration without manual labor;
Food hygiene grade softening resin and anti algae and antibacterial fiberglass resin barrels;
Integrated engineering plastic injection molded shell, no need for external salt box.
| Product name |
Revive-2000 |
| Work flow |
1.5-2.0m3 |
| Working water temperature |
4-40 ºC |
| Working pressure |
0.15-0.6MPa |
| Inlet and outlet diameter |
3/4" |
| Rinse caliber |
1/4" |
| Continuous total soft water |
5.0m3 |
| Total hardness of effluent |
≤0.03mmol/L |
| Adaptive power supply |
220V/50HZ |
| Appearance dimensions (length x width x height) |
41×24×52cm |
| Apply to |
Supporting desktop and vertical computers |
Pure water/deionized water integrated machine
| Model |
LabSE-Q45/63/95/125 |
LabSE-Q45/63/95/125 UT |
| Feed Water Requirements* |
City tap water: Conductivity <400μs, 5-45ºC, 1.0-4.0Kgf/cm² (When feed water conductivity >400μs, it is recommended to use an external softener) |
| DI deionized water index: |
| Resistivity |
16-18.25MΩ·cm |
| Heavy Metal Ions |
<0.1ppb |
| Total Organic Carbon (TOC)** |
<30ppb |
| Bacteria |
N/A |
<0.01cfu/ml |
| Particles (>0.2μm) |
N/A |
<1/ml |
| Water Flow Rate |
2.0L/min (when the water storage tank has water) |
| RO Reverse Osmosis Water Indicators: |
| Conductivity |
≤Feed water conductivity x2-4% |
| Organic Removal Rate |
>99%, when molecular weight >200 Dalton |
| Particle and Microorganism Removal Rate |
>99% |
| Water Production (25ºC)*** |
Q45:45L/hour; Q63:63L/hour; Q95:95L/hour; Q125:125L/hour |
* The quality of incoming water will affect the quality of pure water and the lifespan of the filter column
** Depends on the quality of the incoming water
*** The inlet conductivity was measured at 400us, 25 ºC, 50psi, and a 15% recovery ratio
Q1. What products do you offer?
We offer a wide range of laboratory instruments including centrifuge, vacuum centrifugal concentrators, veterinary equipment, laboratory Water Purifier, nitrogen / hydrogen / air generator, vacuum freeze dryers, homogenizers, freezing microtome, high-throughput tissue grinders, ultrasonic cleaning machines, magnetic stirrer and more. In addition, we also provide single-use bioprocessing products. Welcome to inquire us.
Q2. What kind of services do you offer?
We offer sales, installation, maintenance, and repair services for all of our laboratory instruments.
Q3. Do you have a factory?
Yes, we have a certified standard factory with professional manufacturing capabilities, welcome to visit our factory.
Q4. Can I use my own logo or design on the goods?
Yes, we provide OEM/ODM service, your logo and design can be made on the products.
Q5. Do you ship internationally?
Yes, we ship internationally to customers all over the world.
Q6. Do you provide warranty for your products?
Yes, we provide a warranty for all of our products. Please refer to the specific product page for more information on the warranty period.
Q7. How can I place an order?
To place an order, please contact our sales team via email or phone. They will assist you with the ordering process.
Q8. Can I request a custom configuration for a product?
Yes, we can accommodate custom configurations for certain products. Please contact our sales team to discuss your requirements.
Audited Supplier 
The LabSE system uses tap water as the inlet to prepare tertiary water and deionized water/ultrapure water, with four water production flow rates of 45/63/95/125 liters per hour. The water quality of the produced water meets or exceeds the water quality standards specified in the Chinese Laboratory Water Standards and Test Methods (GB6682-2008) and ASTM, CLSI.
){kind=link}