Product Description
This automatic tensile testing machine robot integrated system mainly consists of a 50kN microcomputer-controlled electronic universal tensile testing machine, a 100kN microcomputer-controlled electronic universal tensile testing machine, Kawasaki industrial robot RS006L, pneumatic grippers, sample clamping platform, and fully automatic extensometer, cross-section measuring table, horizontal push hydraulic clamp, hydraulic oil source, sample recovery box, safety fence and control system operating station.This system is a closed fully automatic testing station composed with the robot as thecore position.
Product Parameters
50kNHost
| 1 |
Maximum load:50kN |
| 2 |
Load sensor resolution:1/1000000 |
| 3 |
Effective test space:1150mm(excludingfixtures) |
| 4 |
Effective test operation space width:600mm |
| 5 |
Relative error of displacement indication:better than±0.5% |
| 6 |
Displacement resolution: 0.033um |
| 7 |
Speed control mode: four modes of displacement, load, stress and strain can be set and switched at will. |
Fully automatic extensometer
| 1 |
Working method: contact type |
| 2 |
Accuracy level: 0.5 (EN 10002) |
| 3 |
Longitudinal gauge length measurement range: 10-205mm |
| 4 |
Gauge length measurement resolution: 0.33um |
| 5 |
Strain measurement range: 0-65mm |
| 6 |
Strain measurement resolution: 0.1um |
| 7 |
Clamping force: 1-2N adjustable |
| 8 |
Maximum testable sample thickness: 30 mm |
| 9 |
Maximum testable sample width: 50 mm |
| 10 |
Maximum testable sample diameter: 30 mm |
| 11 |
Accuracy level: 0.5 (ENISO 9513 standard) |
Automatic measurement system for double cross-section dimensions of specimens
| 1 |
Measurement sample type: rectangular sample |
| 2 |
Measuring thickness or thickness range: 0~20mm |
| 3 |
Testable sample length: 280~310mm |
| 4 |
Measurement method: cross-section four-way measurement |
| 5 |
Measurement resolution: 0.001mm |
| 6 |
Thickness measurement accuracy: 0.004mm |
| 7 |
Width measurement accuracy: When the width is 0.1~3mm, the accuracy is 0.003mm
When the width is 3~6mm, the accuracy is ≤0.1% |
| 8 |
Adapt to sample deflection: ≤8mm |
| 9 |
It has a self-calibration function, and according to the time or sequence set by the software, the robot can grab a special standard block to calibrate the cross-section measurement platform. If there is an out-of-tolerance, the software will automatically stop the test and remind the operator. |
100kNHost
| 1 |
Maximum load:100kN |
| 2 |
Load sensor resolution:1/1000000 |
| 3 |
Effective test space:1150mm(excludingfixtures) |
| 4 |
Effective test operation space width:600mm |
| 5 |
Relative error of displacement indication:better than±0.5% |
| 6 |
Displacement resolution: 0.033um |
| 7 |
Speed control mode: four modes of displacement, load, stress and strain can be set and switched at will. |
Double-sided push-type hydraulic automatic stretching clamp
| 1 |
Jaw clamping range: 0-30mm (can clamp specimens with a certain deflection) |
| 2 |
Maximum clamping force: 255kN |
| 3 |
Maximum system pressure: 30MPa |
| 4 |
Clamp hardness: ≥60HRC |
| 5 |
Opening width: 60mm |
| 6 |
Alignment accuracy: ≤0.2mm |
| 7 |
Clamping thickness range: 0.08-30mm |
Industrial robot
1.Industrial robots are the key to completing a complete set of fully automatic inspection stations. They are an important guarantee for achieving continuous and automatic control of the entire automated inspection process;
2.This solution selects the Kawasaki RS010N six-joint robot, which is programmed using a teaching pendant and communicates with the control system through the RS232 serial port. Use the robot according to the operating rhythm and the action programming that needs to be realized to complete the process of grabbing and placing the workpiece;
3.Based on the weight of the clamping body itself (≤1.2kg) and the weight of the workpiece (≤1.5kg), the preferred Kawasaki RS010N six-joint industrial robot has an end axis load of 10kg;
4.The repetitive positioning accuracy of this series of robots is ±0.03mm, which meets the positioning requirements of the workpiece;
5.The movement radius of this model of robot is 1450mm, which can be changed according to the actual parameters of the workpiece and test requirements.
Company Profile
FAQ
Q1. What products do you offer?
We offer a wide range of laboratory instruments including centrifuge, vacuum centrifugal concentrators, veterinary equipment, laboratory Water Purifier, nitrogen / hydrogen / air generator, vacuum freeze dryers, homogenizers, freezing microtome, high-throughput tissue grinders, ultrasonic cleaning machines, magnetic stirrer and more. In addition, we also provide single-use bioprocessing products. Welcome to inquire us.
Q2. What kind of services do you offer?
We offer sales, installation, maintenance, and repair services for all of our laboratory instruments.
Q3. Do you have a factory?
Yes, we have a certified standard factory with professional manufacturing capabilities, welcome to visit our factory.
Q4. Can I use my own logo or design on the goods?
Yes, we provide OEM/ODM service, your logo and design can be made on the products.
Q5. Do you ship internationally?
Yes, we ship internationally to customers all over the world.
Q6. Do you provide warranty for your products?
Yes, we provide a warranty for all of our products. Please refer to the specific product page for more information on the warranty period.
Q7. How can I place an order?
To place an order, please contact our sales team via email or phone. They will assist you with the ordering process.
Q8. Can I request a custom configuration for a product?
Yes, we can accommodate custom configurations for certain products. Please contact our sales team to discuss your requirements.
Audited Supplier 
){kind=link}